Ifilimu yokuLamination yokuPakisha iBOPP
Isicelo seFilimu yeLamination ekhazimlayo
Ngokwesiqhelo kufuneka itshizwe ngencwadi kunye nebhokisi yewayini emva kokuprintwa, ukuphucula ukukhazimla kunye nokumelana nokungavuthwa kwephepha.
Iimpawu zeFilimu ye-Glissy Lamination
- Ukukhanya okuphezulu kunye nokukhazimla;
- Umqobo olungileyo we-oksijini kunye nokumelana nokungena kwegrisi;
- Iipropati ezibalaseleyo zoomatshini;
- Uzinzo oluhle kakhulu lobukhulu;
- Ukumelana kakuhle nokukrwela.
Ifilimu Ecwebezelayo Yokugquma Ubungqingqwa obuqhelekileyo
I-10mic/12mic/15mic yeenketho, kunye nezinye iinkcukacha zingenziwa ngokwezifiso ngokweemfuno zomthengi.
Idatha yoBugcisa yeFilimu yeLamination ekhazimlayo
| Iinkcukacha | Indlela yoVavanyo | Iyunithi | Ixabiso eliqhelekileyo | |
| Tensile strength | MD | GB/T 1040.3-2006 | I-MPa | ≥130 |
| TD | ≥250 | |||
| Uxinzelelo Oluqhelekileyo Lokwaphuka | MD | GB/T 10003-2008 | % | ≤180 |
| TD | 40-65 | |||
| Ukuncipha kobushushu | MD | GB/T 10003-2008 | % | ≤6 |
| TD | ≤3 | |||
| I-Friction Coefficient | Icala Elinyangiweyo | GB/T 10006-1988 | μN | ≤0.30 |
| Icala elinganyangwanga | ≤0.40 | |||
| Umphunga | GB/T 2410-2008 | % | ≤1.2 | |
| Ukukhanya | GB/T 8807-1988 | % | ≥92 | |
| Uxinzelelo lokumanzisa | Icala Elinyangiweyo | GB/T 14216/2008 | mN/m | 39-40 |
| Icala elinganyangwanga | ≤34 | |||
| Uxinano | GB/T 6343 | g/cm3 | 0.91±0.03 | |
Isicelo seFilimu yeMatte Lamination
Ngokwesiqhelo kufuneka ifakwe i-laminate ngencwadana, incwadana yentengiso kunye nebhegi yesipho emva kokugquma ngeglu kwicala elikhazimlayo okanye ifakwe i-laminate ngezinye iifilimu ezisisiseko. Inika inkangeleko ethambileyo, enobukhazikhazi obuthathu.
Iimpawu zeFilimu yeMatte Lamination
- Amandla aphezulu okuxinana;
- Ukusebenza okuphezulu kwe-matte;
- Ukunamathela okuhle kakhulu kwe-inki kunye nokwaleka;
- Ukusebenza kakuhle kokuthintela amafutha.
Ifilimu ye-Matte Lamination Ubungqingqwa obuqhelekileyo
I-10mic/12mic/15mic/18mic yeenketho, kunye nezinye iinkcukacha zinokwenziwa ngokwezifiso ngokweemfuno zomthengi.
Idatha yoBugcisa beFilimu yeMatte Lamination
| Iinkcukacha | Indlela yoVavanyo | Iyunithi | Ixabiso eliqhelekileyo | |
| Tensile strength | MD | GB/T 1040.3-2006 | I-MPa | ≥110 |
| TD | ≥230 | |||
| Uxinzelelo Oluqhelekileyo Lokwaphuka | MD | GB/T 10003-2008 | % | ≤180 |
| TD | ≤80 | |||
| Ukuncipha kobushushu | MD | GB/T 10003-2008 | % | ≤4 |
| TD | ≤2.5 | |||
| I-Friction Coefficient | Icala eliMatte | GB/T 10006-1988 | μN | ≤0.40 |
| Icala Elichaseneyo | ||||
| Umphunga | GB/T 2410-2008 | % | ≥74 | |
| Ukukhanya | Icala eliMatte | GB/T 8807-1988 | % | ≤15 |
| Uxinzelelo lokumanzisa | Icala eliMatte | GB/T 14216/2008 | mN/m | 40-42 |
| Icala Elichaseneyo | ≥40 | |||
| Uxinano | GB/T 6343 | g/cm3 | 0.83-0.86 | |
